China Non-Lubricated Water Injection Electric Oil Free Air Compressor (KF160-10ETINV) portable air compressor

Item Description

The And many others oil-totally free conversion technologies opens up fully new possibilities for delivering oil totally free compressed air in assembly with ISO 8573-1 Course 0 quality regular.

When it arrives to holding down up-front operational costs, converter technological innovation is preferably suited for the provision of fully oil free of charge compressed air. And it is reliable also: Penetration of oil into the compressed air community is totally not possible!

Working fees are very reduced since no expensive checkups are required. Commonly occurring dangers this kind of as oil penetration have been discarded, and frequent substitution of ingredient aspects as with filters has been completely removed.

Functions of CZPT Etc Series Oil Free Rotary Screw Air Compressor
1. Air good quality to ISO8573-1 Course 0 standard with TUV certification on ask for
2. Established Eco-Tec Oil Free of charge Converter technological innovation from Germany and more than thousands effective set up reference throughout the world
3. Single stage airend layout for straightforward and expense saving servicing
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN expectations
five. Contemporary notion suction valve with vitality conserving modulation handle as choice
6. Clever PLC management panel with sequential / remote manage functions
7. Reliable automatic manage box with “Siemens” contactors
eight. Substantial effectiveness aftercooler (air- or drinking water- cooled offered)

Suitable disposal is no problem both as a matter of fact, in terms of oil content material the condensate is of consuming drinking water high quality! In the And so on converter the long hydrocarbon chains of the residual oil contained in the compressed air are damaged up into harmless carbon dioxide and water, i.e. substances transpiring naturally in the air. 

The catalytic converter incorporates a container with compact granulated pellets via which the compressed air circulates. This method breaks down and converts equally oil droplets and oil vapors. The condensate that varieties later on is for that reason entirely oil free of charge and can be disposed of a lot much less expensively and without the need for further treatment method. 

Oil/hydrogen concentration is beneath ,0571 mg/m3. The addition of the catalytic converter ensures course 1 compressed air (ISO 8573-1) for all apps the place oil cost-free compressed air is vital. 

ADEKOM (ASIA PACIFIC) Minimal founded in the late 90’s is a specialized air/gasoline compressors and treatment technique maker with headquarter in Hong Kong. Its associates found in Vicenza, Italy and Germering, Germany are the world’s top producers with world-wide recognition and knowledge in creating, producing and advertising and marketing of rotary screw air/gasoline compressors for a long time. Quality, Reliability and Strength Effectiveness have been the primary targets of serving consumers all in excess of the planet. CZPT follows the company main of its European associates, is committed to the study & development, top quality assurance and satisfaction of customers’ wants. Right now, what CZPT can do is not just to offer the ideal goods to the market place, but to provide THE Whole Resolution TO YOUR Wants!

Speak to US

Asia Pacific Industry: Spencer Lau (Ms.)

European/ Middle Jap/ African Industry: Echo Lok (Ms.)

American Industry: Alice Kwok (Ms.)

Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Structure Type: Closed Type
Installation Type: Stationary Type


How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Non-Lubricated Water Injection Electric Oil Free Air Compressor (KF160-10ETINV)     portable air compressorChina Non-Lubricated Water Injection Electric Oil Free Air Compressor (KF160-10ETINV)     portable air compressor
editor by CX 2023-04-12

Recent Posts