China supplier High Quality Small Biogas Methane CH4 Recovery Cylinder Compressor for Distilleries air compressor parts

Product Description

Oil-free Gas Compressor

Product Description

Completely oil-free reciprocating piston compressor series: flow rate from 0.01m ³/ Min, pressure ranging from 0.1MPa to 15Mpa, motor power ranging from 0.1KW to 132KW, compressed medium including air, oxygen, nitrogen, sulfur hexafluoride, oil gas, hydrogen, helium, argon, carbon dioxide, biogas, natural gas, etc. According to user requirements, there are regular, silent, explosion-proof, anti-corrosion, etc.

 

Simultaneously equipped with post-processing equipment including coolers, high-efficiency oil removers, refrigerated dryers, adsorption dryers, filters, etc., we provide economical and reasonable configurations according to your different requirements for compressed gas quality. Oil content<0.01PPM, dust particles<0.01HM, CHINAMFG a low pressure dew point of -40 ºC. The gas storage tank series includes air storage tanks, oxygen storage tanks, steam storage tanks, chemical storage tanks, sandblasting tanks, sub cylinders, etc., with a volume of 0.05m ³ To 1000m ³, The pressure ranges from 0.1Mpa to 10.0Mpa. The above products are widely used in industries such as food, beverage, grain machinery, water treatment, medical, pharmaceutical, petroleum, chemical, laser, communication, national defense, scientific research, metallurgy, mining, electronics, power, instruments, automotive protection, advanced spraying, etc.

Product Type

Oxygen compressor Nitrogen compressor
Used in hospital oxygen supply centers to increase the pressure of the room’s oxygen supply pipeline, boost oxygen, and fill it into steel cylinders. It can also be used for industrial acetylene combustion cutting, cutting scrap steel in steel plants, supporting boiler oxygen combustion, and recirculating the vapor oxygen from low-temperature liquid oxygen tanks into the tanks for various working conditions Mainly used for pressurization and filling of nitrogen gas cylinders, as well as nitrogen pressure testing and leakage testing of pipelines. The maximum filling pressure can reach 40MPA, which can be divided into air-cooled and water-cooled cooling according to the cooling method, and 3 and 4 stages of compression according to the compression stage.

 

Hydrogen compressor Carbon dioxide compressor
Used for pressurizing hydrogen in steel plant heat treatment, in the polycrystalline silicon industry, to provide continuous
pressure raw material hydrogen for reactors. In the future, with the widespread construction of hydrogen refueling stations, hydrogen compressors will be more used in hydrogen fuel cells, filling hydrogen vehicles with very high pressure to obtain clean, green, and pollution-free energy.
Used for the recovery of carbon dioxide gas in dry ice plants, and for the recovery, storage, and reuse of CO2 in the supercritical extraction process of carbon dioxide; In the dry ice factory and carbon dioxide extraction process, the suction pressure of the compressor is 0-1BARG, the discharge pressure can reach 80BAR, and the flow rate is 5NM3-600NM3/hour

 

Product Parameters

Detailed Photos

1.The friction components are made using special self-lubricating materials, allowing them to operate without the need for any additional lubricating oil.

2.The expelled air is oil-free, eliminating concerns about secondary pollution of gas facilities and products by oil.

3.It provides both environmental and societal benefits.

4.Only 2 daily inspections are required, making usage and maintenance more convenient.

5.The oil-free design is employed, with no oil present in the crankcase and compression cylinder.

6.These components boast a long lifespan. All models utilize a 4-level motor drive, ensuring low-speed, smooth operation. The mid-cooler is divided for better temperature control, resulting in lower exhaust temperatures and reduced resistance losses in the valve group design.

 

 

Project Case

Product Applications

Application:
The above products are widely used in industries such as food, beverage, grain machinery, water treatment, medical, pharmaceutical, petroleum, chemical, laser, communication, national defense, scientific research, metallurgy, mining, electronics, power, instruments, automotive protection, advanced spraying, etc.

Company Profile

WOBO has a comprehensive marketing service system and strong continuous research and development capabilities. Its products cover more than 30 types of gas chemical compressors, including oil free lubrication air compressors, oxygen compressors, nitrogen compressors, hydrogen compressors, carbon dioxide compressors, helium compressors, argon compressors, sulfur hexafluoride compressors, etc. The maximum pressure can reach 35Mpa. The products are widely used in petrochemical, textile, food, medicine, electricity, machinery, metallurgy, etc, In various fields such as home appliances and environmental protection, our company’s multiple wind brand oil-free compressors have been exported to more than 40 countries and regions in Europe, America, Japan, South Korea, Southeast Asia, the Middle East, and Africa, winning widespread praise from many customers. The WOBO brand has established a good quality reputation in the hearts of users.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support, Video Technical Support
Warranty: 12 Months
Lubrication Style: Oil-free
Samples:
US$ 6500/Unit
1 Unit(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

How Do You Troubleshoot Common Issues with Gas Air Compressors?

Troubleshooting common issues with gas air compressors involves identifying and addressing potential problems that may arise during operation. Here’s a detailed explanation of the troubleshooting process:

1. Start with Safety Precautions:

Prior to troubleshooting, ensure that the gas air compressor is turned off and disconnected from the power source. Follow proper safety procedures, such as wearing appropriate personal protective equipment (PPE), to avoid accidents or injuries.

2. Check Power Supply and Connections:

Verify that the compressor is receiving power and that all electrical connections are secure. Inspect the power cord, plug, and any switches or controls to ensure they are functioning properly. If the compressor is equipped with a battery, check its charge level and connections.

3. Check Fuel Supply:

For gas air compressors that use gasoline or propane, ensure that there is an adequate fuel supply. Check the fuel tank level and verify that the fuel shut-off valve is open. If the compressor has been sitting idle for an extended period, old or stale fuel may cause starting issues. Consider draining and replacing the fuel if necessary.

4. Inspect Air Filters:

Dirty or clogged air filters can restrict airflow and affect the compressor’s performance. Check the intake air filters and clean or replace them as needed. Clogged filters can be cleaned with compressed air or washed with mild detergent and water, depending on the type of filter.

5. Check Oil Level and Quality:

If the gas air compressor has an engine with an oil reservoir, verify the oil level using the dipstick or oil level indicator. Insufficient oil can lead to engine damage or poor performance. Additionally, check the oil quality to ensure it is clean and within the recommended viscosity range. If needed, change the oil following the manufacturer’s guidelines.

6. Inspect Spark Plug:

If the gas air compressor uses a spark plug ignition system, inspect the spark plug for signs of damage or fouling. Clean or replace the spark plug if necessary, following the manufacturer’s recommendations for gap setting and torque.

7. Check Belts and Pulleys:

Inspect the belts and pulleys that drive the compressor pump. Loose or worn belts can cause slippage and affect the compressor’s performance. Tighten or replace any damaged belts, and ensure that the pulleys are properly aligned.

8. Listen for Unusual Noises:

During operation, listen for any unusual or excessive noises, such as grinding, rattling, or squealing sounds. Unusual noises could indicate mechanical issues, loose components, or improper lubrication. If identified, consult the compressor’s manual or contact a qualified technician for further inspection and repair.

9. Consult the Owner’s Manual:

If troubleshooting steps do not resolve the issue, refer to the compressor’s owner’s manual for specific troubleshooting guidance. The manual may provide additional troubleshooting steps, diagnostic charts, or recommended maintenance procedures.

10. Seek Professional Assistance:

If the issue persists or if you are unsure about performing further troubleshooting steps, it is recommended to seek assistance from a qualified technician or contact the manufacturer’s customer support for guidance.

Remember to always prioritize safety and follow proper maintenance practices to prevent issues and ensure the reliable performance of the gas air compressor.

air compressor

Can Gas Air Compressors Be Used for Pneumatic Tools?

Yes, gas air compressors can be used for pneumatic tools. Here’s a detailed explanation:

1. Versatile Power Source:

Gas air compressors, powered by gasoline or diesel engines, provide a portable and versatile power source for operating pneumatic tools. They eliminate the need for electrical power supply, making them suitable for remote locations or construction sites where electricity may not be readily available.

2. High Power Output:

Gas air compressors typically offer higher power output compared to electric compressors of similar size. This high power output enables gas compressors to deliver the necessary air pressure and volume required by pneumatic tools, ensuring optimal tool performance.

3. Mobility and Portability:

Gas air compressors are often designed with mobility and portability in mind. They are compact and equipped with wheels or handles, allowing for easy transportation to different job sites. This mobility is advantageous when using pneumatic tools in various locations or when working in confined spaces.

4. Continuous Operation:

Gas air compressors can provide continuous air supply for pneumatic tools without the need for frequent pauses or recharging. As long as there is an adequate fuel supply, gas compressors can operate for extended periods, allowing uninterrupted use of pneumatic tools for tasks such as drilling, nailing, sanding, or painting.

5. Suitable for High-Demand Applications:

Pneumatic tools used in heavy-duty applications often require a robust air supply to meet their performance requirements. Gas air compressors can generate higher air flow rates and maintain higher operating pressures, making them suitable for high-demand pneumatic tools like jackhammers, impact wrenches, or sandblasters.

6. Flexibility in Compressor Size:

Gas air compressors are available in various sizes and capacities, allowing users to choose the compressor that best matches the air demands of their pneumatic tools. From small portable compressors for light-duty tasks to larger industrial-grade compressors for heavy-duty applications, there is a wide range of options to suit different tool requirements.

7. Reduced Dependency on Electrical Infrastructure:

Using gas air compressors for pneumatic tools reduces reliance on electrical infrastructure. In situations where the electrical power supply is limited, unreliable, or expensive, gas compressors offer a viable alternative, ensuring consistent tool performance without concerns about power availability.

It’s important to note that gas air compressors emit exhaust gases during operation, so proper ventilation is necessary when using them in enclosed spaces to ensure the safety of workers.

In summary, gas air compressors can effectively power pneumatic tools, offering mobility, high power output, continuous operation, and suitability for various applications. They provide a reliable and portable solution for utilizing pneumatic tools in locations where electrical power supply may be limited or unavailable.

air compressor

How Do You Choose the Right Size Gas Air Compressor for Your Needs?

Choosing the right size gas air compressor is crucial to ensure optimal performance and efficiency for your specific needs. Selecting a compressor that is too small may result in insufficient airflow or pressure, while choosing one that is too large can lead to unnecessary energy consumption and higher costs. Here’s a detailed explanation of the factors to consider when choosing the right size gas air compressor:

1. Required Airflow:

Determine the airflow requirements of your applications. Consider the tools, equipment, or processes that will be powered by the compressor and their respective airflow demands. The required airflow is typically measured in cubic feet per minute (CFM). Determine the total CFM required, taking into account any simultaneous or intermittent tool usage.

2. Operating Pressure:

Identify the operating pressure required for your applications. Different tools and systems have specific pressure requirements, measured in pounds per square inch (PSI). Ensure that the compressor you choose can deliver the required pressure consistently.

3. Duty Cycle:

Consider the duty cycle, which refers to the amount of time the compressor will be in operation within a given period. Some applications may require continuous operation, while others involve intermittent or occasional use. Take into account the duty cycle to ensure that the compressor can handle the expected workload without overheating or experiencing excessive wear.

4. Tank Size:

The tank size of a gas air compressor determines its ability to store compressed air and provide a steady supply. A larger tank can help accommodate fluctuations in demand and reduce the frequency of the compressor cycling on and off. Consider the required storage capacity based on the specific applications and the desired balance between continuous operation and storage capacity.

5. Power Source:

Gas air compressors can be powered by different fuels, such as gasoline, diesel, natural gas, or propane. Consider the availability and cost of the fuel options in your location, as well as the specific requirements of your applications. Choose a compressor that is compatible with a power source that suits your needs.

6. Portability:

Determine if portability is a requirement for your applications. If you need to move the compressor to different job sites or locations, consider a portable model with features like wheels, handles, or a compact design that facilitates easy transportation.

7. Noise Level:

If noise is a concern in your working environment, consider the noise level of the compressor. Gas air compressors can vary in their noise output, and certain models may have noise-reducing features or insulation to minimize sound emissions.

8. Manufacturer Recommendations:

Consult the manufacturer’s recommendations and guidelines for selecting the appropriate compressor size for your specific needs. Manufacturers often provide guidelines based on the anticipated applications, airflow requirements, and other factors to help you make an informed decision.

By considering these factors and carefully assessing your specific requirements, you can choose the right size gas air compressor that meets your airflow, pressure, duty cycle, and other operational needs. It’s advisable to consult with industry professionals or compressor experts for guidance, especially for complex or specialized applications.

China supplier High Quality Small Biogas Methane CH4 Recovery Cylinder Compressor for Distilleries   air compressor partsChina supplier High Quality Small Biogas Methane CH4 Recovery Cylinder Compressor for Distilleries   air compressor parts
editor by CX 2024-04-09

Recent Posts